90W CONV KIT AC TO DC HON CRF450X 2005-2018 (RMS900-105941)
This product fits specific motorcycles and ATVs. Check the parts finder to confirm it fits your vehicle.
90W CONV KIT AC TO DC HON CRF450X 2005-2018 (RMS900-105941) is backordered and will ship as soon as it is back in stock.
Hassle-Free Returns
Hassle-Free Returns
45-day change-of-mind returns on unused items in their original packaging. Read our returns and refund policy.
Closeout products are not eligible for change of mind returns. Read our returns policy in full.
Delivery & Shipping
Delivery & Shipping
This product is a dangerous good. Higher shipping rates may apply and delivery to some destinations will be delayed. See our shipping policy for details.
This is a bulky product. Additional shipping charges may apply and delivery to some destinations may be delayed or not possible. See our shipping policy for details.
Easy to understand, fast national shipping. Free shipping on non-bulky orders of $199 and over. See our shipping policy for full details.
90W CONV KIT AC TO DC HON CRF450X 2005-2018 (RMS900-105941) is backordered and will ship as soon as it is back in stock.
Fitment
Fitment
Loading fitments...
Description
Description
Brand new aftermarket AC to DC 90W stator and voltage regulator rectifier.
- Direct replacement for the original unit.
- Plug-and-play, direct fit and easy installation.
- Made with high-grade lamination materials.
- All products are tested before shipping.
Lightweight LED lights have made night-time illumination easier. However, most motorcycle electrical systems need additional power to operate them. This RMSTATOR kit provides higher stator output to support easier starting and the use of auxiliary lights and other accessories.
Designed for DC systems, this kit includes built-in relays that activate the switched 12 V DC output line only when the engine is running. An adjustable shut-off delay automatically turns the lights off, so you don't have to worry about forgetting to switch them off.
Stator Features:
- DC stator compatible with lighting systems of equal or lower power.
- Replaces the OEM stator and significantly increases power output.
- Pickup/pulser coil included.
- Connector included.
- Rubber grommet included.
Voltage Regulator Rectifier Features:
- No assembly required.
- Higher-grade electrical components.
- Quality exceeds OEM equipment.
All item pictures are accurate. If in doubt, compare the item with the original part.
Before Installing the New Stator:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on the stator and regulator rectifier.
- Check and repair any melted wiring.
- Use high-temperature dielectric grease on all connectors.
The stator may use a different wire colour code from the original. All wires are installed in the correct order; do not change any wiring configurations. This stator is designed as a direct plug-in replacement and should be used as such. Always use locking compound when bolting the stator in place. If the stator includes a pickup coil, ensure the air gap is correct during installation. We recommend setting it as close as possible, but no less than 0.010 inches.
Before Installing the New Voltage Regulator Rectifier:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on the stator and regulator rectifier.
- Check and repair any melted wiring.
- Use high-temperature dielectric grease on all connectors.
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Stator Dimensions:
- Interior diameter: 34 mm
- Exterior diameter: 72 mm
- Thickness: 15 mm
- Length of wires from stator to grommet: 80 mm
- Length of wires from grommet to plug: 660 mm
- Length of pickup coil wire to grommet: 60 mm
Stator Specifications:
- Number of wires: 6
- Number of plugs: 2
- Number of pins: 6
Wire-to-Wire Resistance:
- Alternator: Between each Yellow = 0.4 ohms ±20%
- Pickup: Green/White to Blue/White = 260 ohms ±20%
- Source: Blue to Red = 20 ohms ±20%
Voltage Regulator Rectifier Dimensions:
- Width: 53.6 mm
- Length: 79 mm
- Height: 22 mm
- Wire length: 250 mm
- Fixing hole centres: 62 mm
Voltage Regulator Rectifier Specifications:
- Number of wires: 5
- Minimum charging voltage: 14.5 V ±0.5 V
- Maximum charging current: 50 A / 500 W
- Open-circuit voltage: 15 V
- Operating temperature: -20°C to 85°C
Harness Dimensions:
- Wire length: 145 mm
Specifications
Specifications
- Category (Primary)Hard Parts
- Category (Secondary)Electrical
- Category (Tertiary)AC to DC Conversion Kits
- MPNRMS900-105941
Payment Methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.



